Burnham's Series 2PV induced draft boiler is designed for jobs where a chimney is not available or up to code such as in replacement or electric conversion installations. With a small footprint and controls on the front, the Series sidewall vented 2PV can be easily serviced and installed almost anywhere, including a closet or utility room. And with Cast-Iron construction, Burnham's Series 2PV will provide homeowners with years of comfortable home heating.

FEATURES:

• Step Opening Gas Valve
• Stainless Steel Burners
• Induced Draft
• Concealed Gas Valve
• Natural or LP Gas
• Combustible Floor Certified
• Water Only
• Cast Iron Sectional Design
• 51 To 135 MBH Capacity

Dunkirk backs all of its water boilers with full twenty year warranties covering the entire heat exchanger. Most other warranties cover sections of the heat exchangers and most are pro-rated making the homeowner financially responsible.

FEATURES:

• High Efficiency - as high as 84.4%! XEB series hot water boilers provide greater savings by reducing operating costs.
• Electronic Ignition - saves fuel by lighting the pilot only when needed, automatically! You'll never have to light the pilot yourself.
• Induced Draft Blower - increases heat efficiency by allowing only the proper mixture of air and gas to be burned. The blower construction eliminates corrosion and reduces noise levels. Sealed ball bearing motors never need lubrication providing maintenance-free operation.
• Horizontal Venting - induced draft design allows for the flexibility of the boiler to be vented through an outside wall utilizing various vent pipe material or a power venter. It can also be vented conventionally into a lined chimney.

Burnham's Alliance indirect-fired water heater can supply more hot water more efficiently than tankless coils and low capacity direct-fired water heaters. The Alliance utilizes the heat from water and steam boilers to produce domestic water for year-round abundant hot water at a low operating cost.

FEATURES:

• Residential or Commercial Applications
• Topside Inspection Opening
• Stainless Steel Tank and Coil Construction
• Polystyrene Tank Insulation
• Lightweight Scratch Resistnat Polypropylene Outer Jacket
• 5 Sizes (26, 40, 53, 79 and 119 Gallons)

The AMTROL BoilerMateT Classic Series tanks use seamless inner corrosion-proof, nonmetallic, polyethylene reservoirs and high-performance, CFC-free molded insulation to keep water hot. They feature steel exterior shells with a durable two-part appliance-like finish. Classic Series tanks are available with double-wall or commercial coils, to meet any local code requirements.

AMTROL simplified installation and service by using a removable coil, a closed aquastat well, factory-supplied accessories (brass drain valve, tee and relief valve), and by placing all system connections on the same side. Perfect for residential applications, Classic Series tanks are available in 26-41 gallon sizes. For larger applications, select a product from BoilerMateT Premier Series.

FEATURES:

• Seamless inner polyethylene water reservoir - not a sprayed-on glass or epoxy coating. Nonmetallic and corrosion-proof for longer operating life.
• High performance, CFC-free molded insulation - rigid urethane shell completely surrounds reservoir to keep water hot longer.
• Deep drawn outer steel shell protects against rough handling. This pressure retention shell is rated to 150 psi and features a tough, two-part appliance-like finish.

Weil-McLain High Trim Baseboard is designed for installation where heat loss is high or wall space is limited. High Trim is ideal in any building where these conditions exist, not only because of high output and strong durable construction, but also because styling and precision manufacturing result in an exceptionally clean-lined, well-fitting and attractive baseboard. Available in modern baked white enamel.

FEATURES:

• High Trim enclosures are made of pre-painted cold-rolled heavy gage steel for maximum strength. Available in lengths from 2 to 8 feet.
• A finger's touch moves the damper into a partially or completely closed position so output can be easily regulated. Dampers are easily snapped on or off the element brackets for easy cleaning.

Weil-McLain Therma Trim Baseboard is designed for hydronic heating installations in homes and apartments. It is an attractive, clean-lined, functional baseboard that fits into any decor from traditional to ultramodern. Therma Trim is finished in a modern white baked enamel, but may be painted to match woodwork or walls.

FEATURES:

• Therma Trim enclosures are made of pre-coated cold-rolled steel and are available with or without the element in lengths from 2 to 8 feet.
• A finger's touch moves the damper into a partially or completely closed position. Dampers are easily removed for cleaning.

The WarmRite Floor radiant system makes every room warm and inviting. It can be installed directly in slab and basement floors, staple-up applications or topping pour for tile floors in bathrooms, kitchens and foyers.

Install WarmRite Floors throughout for primary home heating or only in select areas to make cool surfaces more comfortable to the touch.

WarmRite Floor Advantages:

Comfort
WarmRite Floors provide the ultimate in home heating comfort - cool uninviting tile or hardwood floors are transformed into luxurious living space.

WarmRite Floors can provide primary heating for the entire home, or they can be designed to provide select floor warming to certain areas of the home - while existing heat sources provide primary heat. What ever your specific needs, ask our

WarmRite Design Experts for complete details on increasing your home comfort level.

Heat Distribution / Room Temperature:
WarmRite Floors provide an even, constant heat throughout the entire house. Warmth stays were it's needed most, at the floor level.

Forced air systems distribute heat unevenly with hot air rising to the ceiling. This creates a " Warm Head - Cold Feet" sensation which is not what the body likes.

WarmRite floors allow you to heat the extremities - feet, legs - and provide you with greater personal comfort at a reduced room temperature.

The same room with forced air heating may require air to be heated as much as 20-30 degrees hotter in order to provide the same level of overall warmth to your body.